Finding the Source: A Guide to Preventing Mold in Bolivar, TN | Leading Remediation Tennessee

The best way to handle a mold problem in your Bolivar, TN home is to prevent it from ever starting. At Leading Remediation Tennessee, we are IICRC-certified mold remediation experts, but we also believe in empowering homeowners. Mold has one essential requirement: moisture. This guide will help you identify and control the common moisture sources in your home to prevent mold growth.

Suspect you have mold in Bolivar, TN? Call Leading Remediation Tennessee for an inspection.

A Homeowner's Guide to Mold Prevention

Mold can grow in as little as 24-48 hours. Controlling moisture is the key to prevention. Here are the top 3 problem areas our Bolivar, TN team sees:

• 1. Basements & Crawl SpacesThe Problem: These areas are naturally cool and damp, making them a perfect breeding ground. Moisture can come from foundation cracks, poor drainage, or high humidity.The Solution:Control Humidity: Run a dehumidifier to keep the relative humidity below 50%.Check Drainage: Ensure gutters and downspouts are clear and directing water far away from your foundation.Seal Your Crawl Space: Consider crawl space encapsulation to create a vapor barrier, which is a highly effective solution our team can discuss with you.
• 2. AtticsThe Problem: In winter, warm, moist air from your living space (from cooking, showers) rises into the cold attic. If ventilation is poor, this moisture condenses on the underside of the roof deck, leading to mold.The Solution:Check Ventilation: Ensure your soffit vents (intake) and ridge vents (exhaust) are not blocked by insulation.Check Exhaust Fans: Make sure your bathroom and kitchen exhaust fans vent outside and not into the attic.
• 3. Bathrooms & KitchensThe Problem: These are high-humidity "wet" areas. Leaks under sinks or behind dishwashers can go unnoticed.The Solution:Use Your Exhaust Fan: Run your bathroom fan during and for at least 20 minutes after every shower.Check for Leaks: Regularly check under your sinks for any small drips or signs of water stains. A small, slow leak is a perfect source for mold.